Powder 3D printer for efficient and fast mass production
We have noticed that often in manufacturing companies, engineers in the construction, R&D or maintenance departments need to expand low- and medium-volume production capabilities. They are looking for solutions where the speed of obtaining parts is important, but also lower cost and advanced part properties.
The Stratasys H350 printer is the answer created specifically for industry, allowing for large-scale production. With a large working area and the ability to stack smaller parts, it enables the printing of a very large number of robust spare parts, tooling and end products. The prints, from materials such as PA12 and PA11, are characterized by very good parameters, e.g. temperature resistance up to 173 degrees C, very high chemical resistance or good mechanical properties.
H350 is used by industries such as manufacturing, industrial automation, appliance and electronics manufacturers, dentistry, packaging manufacturers, and orthopedics.
Immediate transition between the design and production phases
Prints without support structures
Dimensional repeatability of 100 microns on 99.7% of the surface
Easy to use and short training
Speed of component manufacturing – high throughput
Remote print supervision
The device is built on the basis of industrial components, which allows for long-term, trouble-free operation.
Possibility of recovering up to 80% of unused powder
With SLS powder printers, printing time depends on the number and complexity of parts. With Stratasys’ patented SAF technology, each layer is printed within the same time. You gain speed and precision in one machine: a full build chamber takes about 12 hours of operation.
Excellent temperature control across the entire build chamber allows models to be stacked in the most optimal way to fill the chamber, including laid flat. This is very often not possible with other Powder Bed Fusion technologies – SLS, MJF.
The materials used in H350 are described in detail in the material sheets. Polyamide 12 (PA12), for example, has very good heat resistance and retains elasticity on narrow parts of the workpiece.
Are you worried about the complexity of the 3D printing process? Are you at the beginning of your journey when it comes to operating the printer and configuring print settings? The H350 is a plug&play device. You will benefit from a clear interface, short training and the intuitive GrabCAD software. You won’t have to invest extra to start production!
When investing money in a machine, you’d prefer to be sure that any repair will take place at an authorized service center. At CadXpert, we offer products from well-known, stable and proven 3D printing companies. We are in constant contact with the manufacturer and make repairs using authorized parts and methods.
Yes, we won’t leave you alone. Along with each printer, we offer training for employees on how to use the device.
What will you gain by implementing H350 in your company?
In all simulations, Stratasys H350 solutions prove to be faster than competitors in SLS or MJF technology. Print without worrying about wasted time!
We know that our customers need reliable 3D printing information and printer comparisons in their purchases. When it comes to making a substantive case for a purchase, breadth and precision of insight is important.
With this in mind, we created “3D Printer Comparison. A Universal User’s Guide.”
Our guide will help you in the decision-making process. It’s a useful resource that you’ll be able to present to a board of directors or before a purchasing committee. It helps you evaluate technologies and 3D printers against a number of useful criteria.
An example of the return on investment when producing components for the automotive industry. We show howair intake printing comparesto injection molding interms of cost and time.
To implement an in-house printer is to become independent of the supplies, logistics and deadlines of subcontractors. It is also worth including indirect benefits in the calculation of the investment.
Do you aim to get into 3D printing on an industrial level and need financing for selected solutions? At the same time you may not want to lock up full amounts of your own funds. At CadXpert, we support you from the beginning of your journey and enable you to take advantage of leasing our equipment.
We work with several partners to obtain financing for your projects. We will show you where you can go to find support and get funding with simplified procedures and maximum customer care. We will help you buy and implement very quickly.
Leasing is the optimal solution for businesses. With no one-time investment, the device works for you from the beginning and you can treat the installments as a tax-deductible expense.
At CadXpert, certified engineers provide lifetime warranty care for the equipment. There is no need to use foreign, non-responsive service centers.
You will be able to get in touch at any time about the operation of the device and get the missing information.
Our implementation consultants, as part of the initial application audit, will help you find additional applications for your printer so that you can realize the full potential of the device.
We will send a consultant to your factory to review possible 3D printing applications and audit the applications for the printer.
Download the detailed technical specifications of the Stratasys H350 printer.
For the H350 printer, Stratasys has prepared a series of engineering materials for use with SAF technology.
For a full specification of materials available for the H350 printer, see the technical specifications.
The Stratasys H350 printer may need special accommodations. Its dimensions are 1900 x 940 x 1730 mm, and its mains requirements are 400VAC, 3P+N, PE, 50-60 Hz, 16A. We will refer you to a technician who will prepare the space and technical facilities.
Learn about GrabCAD Print software.
Prepare and optimize your design for perfect printing.
Fill out the form and you will automatically receive a link to download the full version of GrabCAD software from Stratasys.
GrabCAD software for the H350 is an additional cost that we will include in the calculation of the return on investment of the device.
We will start with a thorough understanding of your problem related to the manufacturing process of each component. We will consider their characteristics and applications.
We will select the right technology, materials and offer the right printer.
We will prepare a return on investment calculation regarding your planned prints.
We will print a proof for you to see if the solution is suitable for your applications.
We will prepare a price and time estimate according to the established guidelines.
If you accept all the components of the offer, we will proceed with the order.
We will arrange for the installation of the printer at your site and provide training to your employees on the operation of the device.
Your project will be the responsibility of one specific person who will be available to you at every stage of implementation.
If you are thinking about using 3D printing and want to learn more and count the return on investment, talk to our 3D printing consultant.
As part of the conversation, the consultant:
In furtherance of our cooperation:
Do you have a specific problem or challenge that 3D printing could solve?
What size parts do you want to print? The most common prints are important, as they are the ones worth investing in 3D printers for.
What is more important to you aesthetics or the durability of the print? This will help us determine the right printing technology.
Is the print to meet any additional requirements? E.g. chemical resistance, heat resistance, biocompatibility certificate, pressure maintenance, low weight, handling of very heavy loads, abrasion resistance, good sliding properties, etc.
If you prefer a direct form of communication, below you will find
our phone and email contact.
Implementations: +48 577 127 775
Ordering materials: +48 733 501 666
3D printing services: +48 666 682 400
info@druk3d.cx
zamowienia@druk3d.cx
uslugi@druk3d.cx
Still wondering? We hope this list of frequently asked questions will help answer some of your doubts.
The Stratasys H350 printer is a high printing accuracy of +/- 0.2 mm for PA12 material. Such a parameter is sufficient for most cases of industrial production, and in addition, for larger production there is the possibility to adjust the machine settings for even higher accuracy.
In the Stratasys H350 printer, the layer height is 100 micrometers.
GrabCAD software for the H350 printer is an additional cost of approx. 5000 EUR/year, which we will include in the calculation of the return on investment of the device.
YES. The Stratasys H350 printer requires a properly sized exhaust. Our technician will help you adjust the workspace for the device.
The Stratasys H350 is not equipped with a Wi-Fi connection. Files can be transferred to Stratasys printers via LAN, but also with flash drives.
NO. Stratasys printers have an excellent learning curve and can be operated by pre-trained personnel.
YES. We provide initial operational training for all Stratasys printers purchased.
Stratasys’ team of certified experts is available from 9 a.m. to 5 p.m. There is no limited support at CadXpert – you can always call and get technical assistance for your printer.
